1. Accurate position of the locating dowel makes the surface between cabinets flat;
2. Made through CNC, Assembly accuracy 0.1mm, Seamless Assembly;
3. No granular spots and mosiac on the screen, High-degree of color coordinates;
4. Clearer and vivider piture, Seamless, No chromatic;
5. Large viewing angle, Soft image, High resolution;
6. Multi-layer circuit PCB, Lower consumption, Fast Heat-emmiting, Longlife, High stability;
7. Die-casting Aluminum Cabinet, Lighter and Slimmer, High accuracy;
8. Easy to assemble and detach the cabinets;
9. Working Noise: Less than 40DB, Have no influence on the viewing effect;
10. Ultra-low decay, Weather resistance;
11. High contrast ratio up to 5000:1;
12. SMD full color led chip.
P2 LED Module
P2 Indoor Full Color LED Display
3 IN 1
Average Power Consumption(w/m²)
The brightness of R.G.B.is adjustable according to software 100level; Color temperature is adjustable in terms of detailed requirements
AC220 V/50HZ or AC 110V/60HZ
LED screen refresh frame frequency recommended is 300-600HZ(recommended)
64g color(on the condition of 4096 gray scale)
Horizontal/Vertical viewing angle
Recommended 14 BIT
Effective Communication Distance(without relay)
Unshielded twisted-pair net line transmission distance is 100 meters,max transmission distance is 130 meters.
Connecting Method Between Control system and Display terminals
Connect according to the sketch drawing below, make sure output DVI signal from computer well connected with the input terminal on sending card. And Output signal from sending card to the receiving card in the cabinets well. Then Power on.
Die-Casting Aluminum Cabinet
If you're looking for the Digital Led Countdown Indoor P2 made in China, please rest assured to wholesale the screens with our professional manufacturers and suppliers in China. They are all made in our professional factory and are sold at low price.